Show basket (0 Article) My accountShow saved listTo checkout

Epoxy, Urethane and Silicone Adhesives

Adhesives

Epoxy adhesive for industrial applications
Technical bulletin EA-40
Technical bulletin Metalset A4
Technical bulletin MT 13
Technical bulletin Super Instant

Technical Bulletin Variobond [315 KB]

Urethane Adhesive: Urebond II
Technical Bulletin Urebond II [13 KB]

Silicone Adhesive: Sil-Poxy
Technical Bulletin Sil-Poxy [500 KB]

  • EA40
  • Metalset A4
  • MT13
  • Super Instant
  • Variobond
  • Sil-Poxy

EA-40® Transparent Laminating Epoxy Adhesive

EA-40 Clear Epoxy is an unfilled low-viscosity epoxy adhesive that can be spread easily in thin films that are almost transparent after curing. Mix ratio is 1:1 by volume. When mixed 2A:1B by volume, EA-40 will achieve greater heat resistance and improved physical properties.

EA-40 is versatile and can be used for many different assembly and repair applications ranging from electrical potting to jewelry assembly to repairing plumbing fixtures. Bow makers have come to know EA-40 as a tremendous laminating resin. EA-40 provides highly moisture resistant bonds meeting the performance requirements for Federal Specification MMM-A-188, Type III.
EA-40® Epoxy Adhesive - 24 hour cure time

EA-40 products

  • EA40 Epoxy glue /1,9kg

    EA-40 clear epoxy glue 2 comp. set 1,9 kg

    81,04 EUR (Price exclusive 21% VAT)

  • EA40 Epoxy glue /7,3kg

    EA-40 clear epoxy glue 2 comp. set 7,3 kg

    270,96 EUR (Price exclusive 21% VAT)

Een handboog maken m.b.v. EA-40 Epoxy

Metalset® A4 Aluminum Filled Epoxy Adhesive

Metalset® A4 is a powerful epoxy adhesive that has been used for years by all branches of the U.S. Military as well as every major airline and auto manufacturer in the world. Metalset® A4 is used for hundreds of industrial bonding applications and offers excellent adhesion to porous or non-porous surfaces. It can be applied to vertical surfaces without sagging and cures overnight with negligible shrinking.

Once cured, Metal‌set® A4 offers good machining qualities (sanding, drilling, tapping), and resists alkalies, dilute acids and solvents. Applications include stopping leaks in pipes, valves and tanks (i.e. car gas tanks), bonding like and unlike surfaces, filling metal joints, dents, etc., anchoring bolts in wood, concrete, and repairing metal surfaces.

Bell Spec - Metalset A4 meets all quality requirements and can be certified to Bell Spec 299-947-099 Rev. D (see below for details)

Smooth-On Metalset A4 products

  • Metalset A4 paste epoxy glue /set 170 gram

    Metalset A4 paste epoxy glue, 2comp.set 170 gram

    13,98 EUR (Price exclusive 21% VAT)

Smooth-On MT13

Smooth-On MT-13® is a premium performance epoxy for applications requiring maximum holding power and water resistance. MT-13 is a two component epoxy adhesive cement which is mixed in equal parts by volume (100A/123B by weight) and gels in a few hours. It develops handling strength in 16 hours and adheres extremely well to both porous and non-porous surfaces. MT-13 is widely used by the boating industry for assembly and general repair.

Smooth-On MT13 products

  • MT-13 Epoxy glue /142gr

    MT-13 Epoxy lijm 2 comp. set 142 gram

    16,07 EUR (Price exclusive 21% VAT)

Smooth-On Super Instant Epoxy Adhesive

Smooth-On Super Instant® Epoxy is a two component, clear adhesive designed to provide rapid bonding. When mixed in equal proportions - either by volume or by weight - curing takes place quickly enough to permit handling in 5 to 10 minutes at room temperature. Super Instant adheres to metals such as steel, aluminum and brass, to wood, glass, masonry and many hard plastics.
Super Instant® Epoxy - 5-10 minute cure time

Smooth-On MT13 products

  • MT-13 Epoxy glue /142gr

    MT-13 Epoxy lijm 2 comp. set 142 gram

    16,07 EUR (Price exclusive 21% VAT)

Variobond is a two component thixotropic epoxy resin. Recommended as bonding paste for various materials. Solvent free. Excellent adhesion. Easy to apply. Excellent water resistance.

Variobond Epoxy Adhesives

  • Vario Bond 280 ml tube

    This packaging allows the two components to easy dispense on your spatula with a standard caulking gun. Weighing the individual components is a thing of the past and thus will save time, waste and fru ...

    25,10 EUR (Price exclusive 21% VAT)

  • Variobond 1000gr

    Drip-free epoxy adhesive without solvents. To apply for permanent bonding of various materials. Suitable for making fillet joints, etc. Color: opal. 1 kg.

    30,95 EUR (Price exclusive 21% VAT)

Sil-Poxy™ is a one component adhesive made specifically forbonding Smooth-On RTV moldmaking silicone rubbers to silicone rubber and other substrates including some plastics (urethane), plasters/ceramics, fabrics, etc.

Sil-Poxy™ will work with tin- or platinum-cure silicones and provides a strong, flexible bond between silicone parts with high elongation. Can be colored with Silc-Pig™ silicone pigments. Cured adhesive resists weathering, moisture, UV and high temperatures.

Sil-Poxy™ can be used repairing torn silicone rubber molds. Other applications include bonding silicone for prosthetics and animatronics
Features

Can be used repairing torn silicone rubber molds.
Will work with tin- or platinum-cure silicones
Provides a strong, flexible bond

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • special properties

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design