Show basket (0 Article) My accountShow saved listTo checkout

Skin Tite

Platinum Silicone Appliance Material Skin Tite™ is a skin safe silicone used to adhere skin effect appliances directly to the skin and to create fast wounds, scars. Offers maximum control and stays precisely where you put it. Cured adhesive is strong and will bend/flex with body movement. Wounds and appliances will not come off until you remove them. An infinite variety of color effects are achieved using Silc Pig™ silicone pigments.

  • Skin Tite set /150gr

    Skin Tite set 4 oz (112 gr) + 1 oz (28 gr.) ThiVex thickener

    11,60 EUR (Price exclusive 21% VAT)

  • Skin Tite /240gr

    Skin Tite 120 ml. set. Skin Tite is a versitile material that can be used as glue on skin. Hardens in 5 min. depending on body temperature.. Can also be used to directly sculpt wounds on the skin.

    20,80 EUR (Price exclusive 21% VAT)

  • Skin TIte /1kg

    Skin Tite pint set. Skin Tite is a versitile material that can be used as glue on skin. Hardens in 5 min. depending on body temperature.. Can also be used to directly sculpt wounds on the skin.

    58,75 EUR (Price exclusive 21% VAT)

Instructions

PREPARATION...
Important: Shake Derma-tac™ container well before using.

Preparation - Clean the skin with soap and water to remove any oils which may affect the bond of the Derma-tac™ adhesive. Allow skin to dry completely.

APPLICATION & REMOVAL...
Acclerating / Lowering Viscosity – Drying time can be reduced with NOVOCS Gloss Silicone Solvent. Adding 10% NOVOCS gloss by weight will lower viscosity and reduce dry time by about ½.
Application - Derma-tac™ adhesive can be applied using a cotton swab, non-latex makeup sponge or suitable makeup brush. Apply adhesive to the surface of the skin or appliance. When applying on areas of high stretch or movement, such as around the mouth, adhesive can be applied to both the skin and the appliance.
Important: Allow Derma-tac™ to evaporate completely. This adhesive will not work unless it has thoroughly dried. Once Derma-tac™ has dried, press the makeup appliance in place. Derma-tac™ is a pressure sensitive adhesive, the firmer you press, the better the adhesive bond.
Appliance Removal Using Derma-tac™ Remover - Apply Derma-tac™ Remover using a cotton swab, cotton ball or suitable makeup brush. Work the Derma-tac™ remover under the edges of the appliance and onto the skin. work the appliance away from the skin slowly, taking particular care around the eyes, nose and mouth.
Once the Derma-tac™ has been removed, the skin should be cleaned and moisturized using a cosmetic cleanser and moisturizer.

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • special properties

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design