Epoxy resins for laminating
Technical bulletin Epoxamite 100
Variopox Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. Variopox Laminating System is unfilled, low in viscosity, odorless and cures at room temperature.
EpoxAmite® 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite® 100 Laminating System is unfilled, low in viscosity, odorless and cures at room temperature.
Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted. EpoxAmite® 100 Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite® 100 Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil® 3, Urefil® 7 and other fillers can be added for fairing, filleting or bonding applications.
EpoxAmite® pumps are calibrated to deliver the correct amount of Part A resin and Part B hardener with a single push.
One Push ‘A' + One Push ‘B' = Correct Amount of Product to Mix.
No need to weigh components using a gram scale or measure by volume using graduated cups. Pumps are identified by label on pump head.
Note: These pumps are for EpoxAmite® laminating resins ONLY
Let us help you find your way.
The list below may help you find what you are looking for via an alternative path.