Show basket (0 Article) My accountShow saved listTo checkout

EZ Spray system

EZ-Spray Jr. Systeem

EZ-Spray Jr. Spray Gun - is a versatile, convenient and easy-to-use spray system for spraying moldmaking and casting materials. Available with Smooth-On’s cartridges containing spray rubber, plastic or foam. Gun controls the delivery rate of material through the static mixer and air flow

Technical bulletin EZ-Spray 20 silicone
Technical bulletin EZ-Spray 35 silicone
Technical bulletin EZ-Spray Plastic
Technical bulletin EZ-Spray 45 Urethane rubber
Technical bulletin EZ-Spray Foam Sprayable Rigid Foam
Technical bulletin EZ-Spray Styrocoat

  • EZ-Spray Jr.
  • EZ-Spray Silicone
  • EZ-Spray other

Gun

  • EZ-Spray gun

    EZ-Spray Junior gun for spraying several EZ-Spray products. Has to be connected to a compressor.

    904,40 EUR (Price exclusive 21% VAT)

EZ-Spray Silicone

  • EZ-Spray silicone 20 Rubber /8,5kg

    EZ-Spray silicone 20 Rubber / 5 Cartridge unit + 5mixers / (750mlA+750mlB/cartridge), Set = 8,5kg.

    385,37 EUR (Price exclusive 21% VAT)

  • EZ-Spray silicone 35 Rubber /8,5kg

    EZ-Spray silicone 35 Rubber / 5 Cartridge unit + 5mixers / (750mlA+750mlB/cartridge), Set = 8,5kg.

    349,90 EUR (Price exclusive 21% VAT)

EZ-Spray 20 Silicone

EZ~Spray® Silicone 20 is a sprayable silicone that cures quickly to a soft rubber with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable spray thickness is attained, EZ~Spray® Silicone 20 cures in about 10 minutes with negligible shrinkage to a strong, durable mold rubber good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

EZ~Spray® Silicone 20 is effective at making fast, cost effective vacuum bags for producing composite parts. Newly sprayed or injected bags can be removed from the mold in 10 minutes and used immediately in production with polyester or epoxy resin systems. The advantage that EZ~Spray® Silicone 20 offers vs. conventional vacuum bagging systems is the speed at which a production-ready silicone bags can be made resulting in significant time and labor savings.Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray® Silicone 20 will cover approximately 1.66 sq. ft. (0.15 square meters).

EZ-Spray Silicone 35

EZ-Spray 35 Silicone is een spuitbaar polyadditief siliconen systeem met zeer snelle verwerkingscyclus. De silicone is na een uur uitgehard met een shore waarde A35. Deze rubber is geschikt voor het gieten van kunstharsen, schuimen, gips, cement/beton mortels enz.

other

Cartridge

  • EZ-Spray StyroCoat /5,2 kg

    StyroCoat Plastic is a sprayable polyurethane plastic formulated to economically coat a variety of surfaces. Dispensed through Smooth-On's EZ~Spray , Jr. cartridge system, the plastic cures in abo...

    212,06 EUR (Price exclusive 21% VAT)

  • EZ-Spray Rigid Foam /5,2kg

    EZ-Spray Rigid Foam 5,2 kg(3x carttridge unit +4mixers +2flow restrictors (1,75/cartridge))

    212,06 EUR (Price exclusive 21% VAT)

  • EZ-Spray 45 Urethane Rubber /5,2kg

    EZ-Spray 45 Urethane Rubber 5,2 kg(3x carttridge unit +4mixers +2flow restrictors (1,75/cartridge))

    212,06 EUR (Price exclusive 21% VAT)

  • EZ-Spray Urethane Plastic /5,2kg

    EZ-Spray Urethane Plastic 5,2 kg(3x carttridge unit +4mixers +2flow restrictors (1,75/cartridge))

    212,06 EUR (Price exclusive 21% VAT)

Accessories

  • EZ-Spray static mixing tubes small/10stuks - old

    EZ-Spray Jr. SMALL Static Mixers -Bag Of 10 (Includes Spray Tip) Description; NEW EZ~Spray Jr. SMALL mixing tip for spraying EZ Spray plastics, foams and urethane rubber. Comes with spray nozzle attached. Bag of 10 tips;Bag of 10 LARGE EZ-Spray® Jr static mixers for EZ-Spray® STYROCOAT, EZ-Spray® Foam, and EZ-Spray® 45 Urethane Rubber. Includes spray tip and threaded collar.

    62,48 EUR (Price exclusive 21% VAT)

  • EZ-Spray static mixing tubes large - bag of 10pcs.

    EZ-Spray Jr. LARGE Static Mixers -Bag Of 10 (Includes Spray Tip) Bag of 10 EZ-Spray Jr LARGE Static Mixers for EZ-Spray® Silicone 20 and EZ-Spray® Silicone 35. Includes Spray Tip.

    86,47 EUR (Price exclusive 21% VAT)

  • EZ-Spray Mixer/ Nozzle small bag/10

    EZ-Spray Mixer/ Nozzle small bag/10

    49,21 EUR (Price exclusive 21% VAT)

  • EZ-Spray jr. Mixer/Nozzle large bag of 10

    EZ-Spray jr. Mixer/Nozzle large bag of 10

    68,43 EUR (Price exclusive 21% VAT)

  • EZ-Spray Mixer Adapter

    EZ-Spray Mixer Adapter

    21,24 EUR (Price exclusive 21% VAT)

  • EZ-Spray Flow Restrictors - bag of 10

    EZ SPray FLow restrictors - Bag of 10

    6,31 EUR (Price exclusive 21% VAT)

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Lifecasting

    everything you need for lifecasting aplications: alginate's, silicones and plaster bandages.

  • Molding

    a range of flexible and rigid moulding materials for moulding all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Clear Products

    waterclear, translucent or transparant rubbers and plastics for casting and molding.

  • Foam

    liquid flexible and rigid foams, Rigid Foam Blocks, of many types and quantities.

  • Restoration

    materials for restoring in- and exterior ornaments and buildings.

  • Metal / Stone / Wood Fillers

    materials for cold castings; both plastics and metal powders.

  • Brushable Plastics & Coatings

    that can be brushed of sculpted styrene or polyurethane foam.

  • Composites

    Resins and reinforcement for lay-up applicatins. Poyester, epoxy, acrylic resin, glass fibres etc.

  • Epoxy Modelling

    Self hardening two component epoxy putties work like clay but get stone-hard without firing.

  • Performance Resins

    can be used for a variety of projects, but mainly used for industrial (design) applications.

  • Semi Rigids

    urethane casting resins cure quickly to semi-rigid plastics with excellent impact resistance.

  • Accessories

    you might also need; sealers, release agents, tools and more...

  • Support Shells

    these materials are used for mother molds and support shells.

  • Prototyping

    resins and other materials used for rapid prototyping.

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design