Show basket (0 Article) My accountShow saved listTo checkout

Mold Star 20T /7,26kg

Mold Star® 20T

Mold Star® 20T is an easy to use Shore 20A translucent platinum silicone that is mixed 1A:1B by volume (no weighing scale necessary). It features a relatively low viscosity and vacuum degassing is not required for most applications. Pot life is 6 minutes and cure time is 30 minutes at room temperature.

Mold Star® 20T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Mold Star® 20T silicone can be thickened with Thi-Vex® thickener for brush-on application and effects.

An infinite number of color effects can be achieved by adding Silc Pig® silicone pigments or Cast Magic® effects powders.

Mold Star® 20T is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.

Note: This product will not cure against surfaces containing sulfur, even when sealed.

MoldStar 20T gallon unit (3,63kg A + 3,63 kg B)

Readily Available

214,26 EUR

Price exclusive 21% VAT
Weight: 9 kg
set

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Lifecasting

    lifecasting aplications: alginate's, silicones and plaster bandages.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Clear Products

    translucent or transparant rubbers and plastics.

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Metal / Stone / Wood Fillers

    cold castings and other fillers; plastic and metal powders.

  • Brushable Plastics & Coatings

    can be brushed on sculpted styrene or polyurethane foam.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Epoxy Modelling

    putties that work like clay but get stone-hard without firing.

  • Performance Resins

    used for a variety of projects, but mainly used for industrial (design) applications.

  • Semi Rigids

    semi-rigid plastics with excellent impact resistance.

  • Accessories

    you might also need; sealers, release agents, tools and more.

  • Support Shells

    for mother molds and function wellas support shell.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design