Show basket (0 Article) My accountShow saved listTo checkout

Release & Sealing Agents

Transport Regulated Goods

The transport of items out of this group can be restricted due to EU restrictions and regulations and will require a specialized carrier. Transport costs will not be automatically calculated. We will give you transport options and a quote later. Preparing this order for transport will not fit within our normal time frame and delivery may take a few days longer.

  • Release Agents

Release Agents for Moldmaking & Casting

We carry a full range of release agents to cover many applications. Aerosols and Non-Aerosol, Solvent Based or Water Based; made especially for Mold Making and Casting.

One Step® Release Agent And Sealer seals and releases porous originals in one step.

Ease Release® Release Agent covers nearly every moldmaking and casting application.

Ease Release® 2831 is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams.

In & Out® II Water Based Concrete Release Agent is an economical concentrate for releasing concrete castings from Smooth-On rubber molds. Does not affect surface detail of castings. Prolongs mold life.

Universal Mold Release® will release polyurethane mold rubbers from properly prepared models. Not for use with silicones.

And Other release agents such as Acmos 82, PVA, Plaster separator, Royal Jel-E...

One Step

One Step

  • One Step /360 gram

    Convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent...

    33,80 EUR (Price exclusive 21% VAT)

  • One Step /18ltr

    This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers. Bucket 18 liter

    319,69 EUR (Price exclusive 21% VAT)

One Step

One Step® is a convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers.

One Step® will facilitate the release of cured urethane mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on modeling clays.

Technical bulletin One Step

Ease Release

Ease Release

  • Ease Release 200 aerosol /400gr

    Removable aerosol release agent - silicone based - 400 gram spraycan

    19,10 EUR (Price exclusive 21% VAT)

  • Ease Release 205 /30ml

    Liquid version of Ease Release 200. Removable release agent

    13,39 EUR (Price exclusive 21% VAT)

  • Ease Release 205 /340ml

    Liquid version of Ease Release 200. Removable release agent - silicone based - Bottle 30 ml

    19,40 EUR (Price exclusive 21% VAT)

  • Ease Release 305 /2,27kg

    Ease Release 305 1 gallon (6lbs=2,72kg)

    68,37 EUR (Price exclusive 21% VAT)

  • Ease Release 205 /13,66 kg

    Liquid version of Ease Release 200. Removable release agent - silicone based - Bucket 13,66 kgs.

    363,03 EUR (Price exclusive 21% VAT)

  • Ease Release 305 /13,6kg

    Ease Release 305 5 gallon pail

    225,66 EUR (Price exclusive 21% VAT)

  • Ease Release 300 aerosol /400gr

    for PU, epoxy, polyester, RTV silicones and thermoplastics.

    17,43 EUR (Price exclusive 21% VAT)

  • Ease Release 400 aerosol /400gr

    Removable aerosol release agent - silicone based - spraycan 400grams

    17,67 EUR (Price exclusive 21% VAT)

  • Ease Release 500 aerosol /400gr

    Removable aerosol release agent - silicone based - spraycan 400 gram

    18,80 EUR (Price exclusive 21% VAT)

Ease Release 200 & 205

Ease Release® 200 and 205 is an excellent general purpose release agent for making molds and casting parts. This product will release urethane rubber, urethane resins, polyester resins, RTV silicones, and thermoplastic polymers. Ease Release® 200 and 205 is effective on urethane, silicone and metal molds.

Ideal For Releasing:
~ Urethane Rubber From Original Models
~ Urethane Plastic From Urethane Rubber
~ Silicone Rubber From Original Models
~ Silicone Rubber From Silicone Rubber
~ Urethane Plastic From Silicone Rubber

Technical bulletin Ease Release 200 & 205
Technical bulletin Ease Release 300
Technical bulletin Ease Release 400

NOT FOR USE WITH URETHANE FOAMS For releasing foam, use Ease Release 2831

ER 2831

Ease Release 2831

  • Ease Release 2831 /0,3kg

    Ease Release 2831 Seal- & releaseagent waxbased 0,3 kgs.

    29,33 EUR (Price exclusive 21% VAT)

ER 2831

Ease Release® 2831 is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams. This wax dispersion is designed to operate at mold temperatures ranging from 160°F to 200°F with minimal wax build-up. EASE RELEASE 2831 works with aluminum, steel, and elastomeric mold construction. Looking for a different Mann product? View the Mann mold release agent product line.

Technical bulletin Ease Release 2831

In&Out

In & Out

  • In&Out Concrete Release Agent /1kg

    water soluble release agent will aid in releasing concrete or gypsum plaster castings

    8,93 EUR (Price exclusive 21% VAT)

  • In&Out Concrete Release Agent /3,4 kgs

    water soluble release agent will aid in releasing concrete or gypsum plaster castings

    75,74 EUR (Price exclusive 21% VAT)

  • In&Out Concrete Release Agent /18,2ltr

    water soluble release agent will aid in releasing concrete or gypsum plaster castings

    327,55 EUR (Price exclusive 21% VAT)

In & Out

IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. IN & OUT® II provides a clean, positive release and does not interfere with or affect surface detail and helps minimize air bubbles in finished castings. Simplify Your Production Casting With IN & OUT II®

- Will Not Stain / Soften Concrete Or Gypsum Surfaces
- Mix With Water - Economical
- Will Not Affect Color Pigmenting Of Cast Concrete
- Minimizes “Bug Holes” In Concrete And Air Bubbles In Gypsum Castings
- Keeps Molds Clean - Does Not Build Up
- Significantly Extends Mold Life

IN & OUT® II IS DILUTED WITH WATER. Mix 4 parts water to 1 part In & Out® II. Mixing can be done by hand or slow speed mixer. Do not shake or agitate as this may cause product to foam. How you dilute IN & OUT® II (amount mixed with water, coverage and frequency of application) will depend on the concrete aggregate mix and the form material you are casting into. For example, when casting concrete with a low grit/high sand content (minimal abrasion) into a polyurethane mold, the mix ratio of water to IN & OUT II® can be 4 : 1. High grit content may call for a dilution ratio of 2 parts water to 1 part release agent. Mix only amount needed for one day. Mixture may separate after 24 hours. Re-mix to a uniform consistency and apply.

Technical bulletin In & Out water soluble release

Universal

Universal Mold Release

  • Universal mold release /100ml

    Silicon based Universal release agent - liquid. Bottle 100 ml

    6,70 EUR (Price exclusive 21% VAT)

  • Universal Mold Release aerosol /400gr

    Silicon based Universal release agent - aerosol, without ozone gas - spraycan 400 grams

    16,90 EUR (Price exclusive 21% VAT)

  • Universal mold release liquid /2,77 kg

    Silicon based Universal release agent - liquid. Bottle 2,77 liter

    78,90 EUR (Price exclusive 21% VAT)

Universal Mold Release

Universal Mold Release® is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal® or other sealer may be necessary. If using silicone rubber, seal model surface with SuperSeal® only. Do not use UMR.UMR also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.

- Available in aerosol or bulk liquid.

Technical bulletin Universal Mold Release

Other release

Other release agents

  • AquaCon Concrete Release /3,76kg

    AquaCon Concrete Release Gallon

    45,76 EUR (Price exclusive 21% VAT)

  • Acmos 82 aerosol /400gr

    Removable universal release agent/ wax based / aerosol spraycan

    14,66 EUR (Price exclusive 21% VAT)

  • PVA /500ml

    (Poly Vinyl Alcohol) Release agent for polyester - 500ml can

    8,09 EUR (Price exclusive 21% VAT)

  • PVA /1ltr

    (Poly Vinyl Alcohol) Release agent for polyester - 1 liter can.

    12,85 EUR (Price exclusive 21% VAT)

  • Plaster Seperator /500ml

    Gypsum release agent for use with plaster-against-plaster applications. Bottle 500 ml.

    17,79 EUR (Price exclusive 21% VAT)

  • Royal JeL-E /115 gr

    Royal JeL-E, Release agent for casting silicone in silicone, 115 gr pot

    12,08 EUR (Price exclusive 21% VAT)

  • U12 Mold Rinse and Release /3,6 kg

    95,20 EUR (Price exclusive 21% VAT)

  • U-10 Mold Release /1ltr

    U-10 Mold Release. To apply in your rubber mold before casting plaster. Bottle 1 liter.

    38,77 EUR (Price exclusive 21% VAT)

  • Vaseline /250gr

    petroleum jelly.

    4,05 EUR (Price exclusive 21% VAT)

  • Vaseline /1kg

    petroleum jelly.

    11,96 EUR (Price exclusive 21% VAT)

  • Silicone Pump Spray

    To facilitate removal of organic materials from inorganic surfaces

    17,26 EUR (Price exclusive 21% VAT)

  • Sealing Agents

Sealing Agents For Use On Porous Models

One Step® Release Agent And Sealer seals and releases porous originals in one step.

SuperSeal® was developed as an economical, fast-drying sealing agent for a variety of surfaces including modeling clays, gypsum plasters, concrete and wood.

Sonite® Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber from a variety of model surfaces, plastics from plastics and other industrial applications.

U-10 Soap Solution, to seal plaster models before applying mold rubber.

And the Kwikee® Sprayer, an economical alternative to aerosols for dispensing release agents and sealing agents.

Super Seal

Super Seal

  • Super Seal Kit

    SuperSeal & Ease Release 205 Combo Pack One 2-oz.

    11,35 EUR (Price exclusive 21% VAT)

  • SuperSeal /500ml

    SuperSeal - sealing and release agent - 500ml can

    28,56 EUR (Price exclusive 21% VAT)

  • SuperSeal /3,7lt

    SuperSeal - 1 Gallon Sealing Agent for Porous Surfaces

    54,50 EUR (Price exclusive 21% VAT)

Super Seal

SuperSealTM was developed as an economical, fast-drying sealing agent for a variety of surfaces including modeling clays, gypsum plasters, concrete and wood.

This sealing agent will quickly and effectively seal surfaces without interfering with surface detail. The new formula offers better performance and faster evaporation. Mold rubber can then be applied.

This product incurs a ground hazard shipping fee when shipped in the gallon size.

Technical bulletin Super Seal

One Step

One Step

  • One Step /360 gram

    Convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent...

    33,80 EUR (Price exclusive 21% VAT)

  • One Step /18ltr

    This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers. Bucket 18 liter

    319,69 EUR (Price exclusive 21% VAT)

One Step

One Step® is a convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers.

One Step® will facilitate the release of cured urethane mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on modeling clays.

Technical bulletin One Step

Sonite

Sonite

  • Sonite Wax /100gr

    universal release agent wax - Jar 100 grams.

    9,64 EUR (Price exclusive 21% VAT)

  • Sonite Wax /0,8 kg

    universal release agent wax - Jar 800 grams.

    25,82 EUR (Price exclusive 21% VAT)

  • Sonite Wax /3kgs

    universal release agent wax - bucket 3 kgs.

    59,38 EUR (Price exclusive 21% VAT)

Sonite wax

Sonite® Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber from a variety of model surfaces, plastics from plastics and other industrial applications. (It may be necessary to follow application of Sonite® Wax with suitable mold release agent such as Universal Mold Release®). Consult technical bulletin of mold rubber product for complete details.

Technical bulletin Sonite Wax

U-10 Soap solution

U-10 Soap solution

  • U-10 Soap Solution /1ltr

    U-10 Soap Solution, to seal plaster models before applying mold rubber. Bottle 1 liter

    12,50 EUR (Price exclusive 21% VAT)

Non-Aerosol Sprayer

Kwikee Sprayer

  • Kwikee Sprayer - 946 ml Pressure Sprayer

    The Kwikee sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing a...

    139,35 EUR (Price exclusive 21% VAT)

KwikeeŽ Non-Aerosol Sprayer

The Kwikee® Sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing agent or release agent in a fine mist.

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Lifecasting

    lifecasting aplications: alginate's, silicones and plaster bandages.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Clear Products

    translucent or transparant rubbers and plastics.

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Metal / Stone / Wood Fillers

    cold castings and other fillers; plastic and metal powders.

  • Brushable Plastics & Coatings

    can be brushed on sculpted styrene or polyurethane foam.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Epoxy Modelling

    putties that work like clay but get stone-hard without firing.

  • Performance Resins

    used for a variety of projects, but mainly used for industrial (design) applications.

  • Semi Rigids

    semi-rigid plastics with excellent impact resistance.

  • Support Shells

    for mother molds and function wellas support shell.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design