Holden's HX-200™

HX200CoatDipPint ⓘ CC243418-8AB6-A64E-9B99-0C09473F60B7
Latex

Pre-vulcanized, low viscosity liquid for dipping and coating, creating thin, stretchy skins, and is often referred to as “balloon” latex due to its flexibility.

  • Creates thin, stretchy skins

  • Use with FabTone™ pigments for color

  • Store at room temperature

  • Avoid freezing

environment.svg

Warning

H411 - Toxic to aquatic life with long lasting effects.
€ 16.06

(€ 13.27 without 21% VAT)

In stock

Description

This pre-vulcanized, low viscosity liquid is designed for dipping and coating applications. It is known for creating thin, stretchy skins and is often referred to as “balloon” latex due to its flexibility. Suitable for DIY and repair projects, it can be colored using FabTone™ pigments.

Instructions

SAFETY FIRST

  • Keep out of reach of children.

  • Avoid use if you have known allergies to natural latex.

  • Avoid contact with eyes. If contact occurs, flush eyes with water for 15 minutes and seek medical attention.

  • Remove from skin with waterless hand cleaner followed by soap and water.

  • Children should not use this product without adult supervision.

PROCESSING RECOMMENDATIONS

  • GENERAL PREPARATION: Do not allow the product to freeze as it will become unusable. Store and use at room temperature (23°C). Use as soon as possible due to limited shelf life. Colder temperatures slow working/cure time; warmer temperatures reduce it.

  • Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk. Wash thoroughly after handling. Do not eat, drink, or smoke in the work area. Keep the container closed when not in use.

POURING, CURING & PERFORMANCE

  • MIXING AND CURING: Stir before use. The product can coat/dip almost anything but is not removable from fibrous materials. Avoid getting it on fabrics unless intended, as it adheres firmly. For non-porous items, peel the latex away carefully.

  • USING THE CURED LATEX: Lightly dust the cured latex with talc to prevent sticking. Avoid exposure to oils, greases, or solvents. Store castings out of direct sunlight.

  • CLEAN UP: Clean wet and dry latex with soap and water.

  • OPTIONAL - COLORING & STIFFENING: Use Fabtone™ latex colorants to dye the latex in its liquid state. HX-Stiffener™ can make the rubber less flexible.

Specifications

Shelf Life Limited
Operating Temperature 23°C
Available in Latex
Product Color Storage Temperature Cure Time Viscosity Shelf Life Operating Temperature Minimum Layers For Thickness Thickness For Smaller Items Thickness For Larger Items Full Cure Temperature Range Full Cure Time At Elevated Temperature Full Cure Time Specific Gravity Shrinkage Solids Content Copper Content Manganese Content Potassium Hydroxide (KOH) Mechanical Stability Accelerated Cure Time
Holden's Mold Making Latex HX-80™ Natural Below 49°C 7 days at 23°C Low Limited 23°C 10 layers 0.16 cm 0.32 cm 43°C to 49°C 8-12 h. - - - - - - - - -
Holden's Mold Making Latex High Viscosity HX-974™ White < 49°C - 7,000-9,000 cps - - 10 layers 0.16 cm 0.32 cm - - 7 days at 23°C 0.95 5-10% 56-60% < 8 ppm < 8 ppm 0.800000 650 sec. 8-12 h. at 43-49°C
Holden's HX-200™ - - - - Limited 23°C - - - - - - - - - - - - - -
Holden's Frisket Mask Latex - - - - - 23°C - - - - - - - - - - - - - -
Recommended products

Why buy at FormX?

Subscribe to our Newsletter

Stay up to date with the latest offers

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.