FormCast Rhino

B2B

For professional use only!
You can order these products via our B2B site

www.FormX.biz
- English only

- Chamber of Commerce number required








FormCast Rhino

The Form Cast RHINO liquid plastic is an ultra low viscosity resin with ivory color. When properly used it will yield strong, detailed and bubble free castings. Vacuum degassing is not necessary. Form Cast Rhino is suitable for industrial use such as making foundry patterns, core boxes, vacuum forming tools and prototyping. This resin may be mixed with various fillers and dyes. Cured castings are strong and durable and resistant to moisture and mild solvents. They can be sanded, drilled, sawed and - after degreasing - painted. Typical uses include the manufacturing of prototypes, models, sculptures, decorative articles, anatomical models etc .

- verry tough
- high impact resistance
- short demoulding time
- low viscosity

- mixing ratio 100 A - 100 B by weight
- viscosity 65 mPas
- ivory color
- working time approx. 3 minutes
- demold time 0,5 - 1,5 hrs
- shore hardness 72 D
- e-Modulus 1000 MPa
- impact resistance 26 kj / m2

Technical Bulletin



FormCast Rhino products

Standard

FormCast Rhino /2kg Shore D72 | Cure Time: 30 - 90 min



Standard

FormCast Rhino /5kg Shore D72 | Cure Time: 30 - 90 min



Standard

FormCast Rhino /10kg Shore D72 | Cure Time: 30 - 90 min




Safety Information

Form Cast Rhino safety Part A



Form Cast Rhino safety Part B





Rhino Slow

FormCast Rhino Slow /2kg Shore D72 | Cure Time: 5 - 8 hours



FormCast Rhino Slow /5kg Shore D72 | Cure Time: 5 - 8 hours



FormCast Rhino Slow /10kg Shore D72 | Cure Time: 5 - 8 hours




Safety Information Rhino Slow

Form Cast Rhino safety Part A Slow



Form Cast Rhino safety Part B





FormCast Rhino resin testing



How to Use

Stir the individual components well before use. Weigh or measure both parts accurately and assemble in a clean and dry container and mix for 30 to 60 seconds. For the mixing cup, best use PP or PE plastic cups. Avoid contact with moisture as this will cause foam formation of the resin. When using Urefil filler, add these to the individual components and stir untill both have the same viscosity. Then let both of these components effortlessly blend together.



(C) 2010 / 2011 - All rights reserved

Print this page