SMASH! Plastic™

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.


Smash Plastic

SMASH! Plastic™ is a new urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). SMASH! Plastic™ is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1/8" (0.33 cm.).

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.

Features

- Room temperature cure system that is easy to use - mixed 1A: 1B by volume (1 cup + 1 cup)

- 90 minute demold time - can be broken after 6 hours

- Low viscosity ensures easy mixing and pouring.

- Cured castings are UV RESISTANT.

- Vibrant colors and color effects are achieved by adding pigment dispersions.

Technical bulletin Smash Plastic



- Read the safety information label. Click on the image

- Lisez les informations de sécurité cliquez sur l'image

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

- Lees het veiligheidsinformatie label. Klik op de afbeelding.


Smash Products

SMASH! Plastic™ /1 kg SMASH! Plastic™ /1 kg 83,05 EUR



SMASH! Plastic™ /7 kg SMASH! Plastic™ /7 kg 376,52 EUR







Selecting A Mold Rubber - Casting into a silicone mold made with Smooth-On Mold Max™ Silicone or Mold Star™ 15, 16 or 30 platinum cured silicone (not Mold Star™ 20T) is recommended. Do not use other silicone products. If you are unsure about surface compatibility, a trial casting should be made. To prevent cure inhibition, post-cure newly made Mold Max™ silicones for 8 hours at 60°C and let cool prior to casting resin.

Measuring - Materials should be stored and used in a warm environment 23°C. This product has a limited shelf life and should be used as soon as possible. The proper mixing ratio is 100A:100B by weight or volume.

Mixing - Dispense equal amounts of Parts A and B into a mixing container and mix thoroughly for 90 seconds, making sure you scrape the sides and bottom of the container several times. If coloring or adding filler, add filler or tint to Part B and pre-mix thoroughly before adding Part A.

If vacuum degassing prior to pouring, subject mixture to 29 h.i.g. mercury in a suitable vacuum chamber for 2 - 3 minutes or until mixture rises, breaks and falls. Allow for 3 to 4 times volume expansion in mixing container. Do not vacuum too long, as this material gels quickly. Apply Universal™ Mold Release to mold surface prior to casting to ensure easy demold of fragile castings.

Curing - Important: Use this product with at least room size ventilation or in proximity to a forced outlet air vent and do not inhale/breath fumes. Fumes, which may be visible with a significant mass concentration, will quickly dissipate with adequate ventilation. Castings with significant mass may be hot to the touch and irritate skin immediately following cure. Let casting cool to room temperature before handling.

Pouring - Do not spill on skin. Pour material in the lowest spot of mold cavity and let material rise and seek its level.

Rotationally Casting - Pour material into mold and rotationally cast for 7 – 10 minutes. Estimating the amount of material you need to build 0.33 cm thickness on your rotationally cast piece may take some practice & experimentation.

Demold - After 90 minutes, plastic is cured enough to be removed from the mold. Plastic is very fragile, so be careful removing your casting from the mold. Applying Universal Mold Release™ to mold surface before casting should aid in removing the casting from your mold. The longer this material cures the more brittle it becomes, reaching full “brittleness” in 24 hours.

Creating a Glossy Surface - Applying a fine mist of denatured alcohol using a sprayer (such as the KWIKEE™ Sprayer) over the surface of a cast SMASH! Plastic™ piece will cause the surface to become glossy/shiny and enhance the glass-like appearance of a breakaway prop. Applying denatured alcohol will cause the surface to become temporarily sticky or tacky. Allow denatured alcohol to dry thoroughly until the surface of the casting is no longer tacky before using prop.

Temperature - When castings are exposed to temperatures above 26°C, they may soften and warp. Store castings at or below room temperature for 24 hours prior to use.

Usage - Inanimate Object: Let material cure for at least six hours prior to “smashing” against inanimate object (for example, on the floor, a wall, etc.).

Usage - On A Person: Before “smashing” a cast piece over someone’s head, make sure that the wall thickness in all directions is not more than 0.33 cm. Also, let the material cure for at least 16 hours at room temperature to become fully “brittle”.

Warning: Smashing a cast piece that is not fully cured or has a wall thickness greater than 1/8” – 0.33 cm against a body part may result in serious physical injury



You might also need...

Mixing Beakers
Measuring Cups & Jars
Weighting devices
Brushes
Protective Gear such as gloves
Release agents


Mixing, Measuring & Weighing

Mixing

Measuring Cup /30ml Measuring Cup /1oz 0,19 EUR



Measuring cup /125ml Measuring cup /4oz 0,48 EUR



mixing / measuring cup 350 ml Mixing and measuring beaker 0,57 EUR



mixing / measuring cup 700 ml Mixing and measuring beaker 0,63 EUR



mixing / measuring cup 1400 ml Mixing and measuring beaker 0,80 EUR



mixing / measuring cup 2300 ml Mixing and measuring beaker 1,46 EUR



SO mixing cup /473ml SO mixing cup /16oz 1,04 EUR



Mixing

SO mixing cup /946ml SO mixing cup /32oz 1,09 EUR



SO mixing cup /1892ml SO mixing cup /64oz 2,84 EUR



SO mixing cup /4880ml SO mixing cup /165oz 3,35 EUR



Mixing beaker round 500 cc contents 0,25 EUR



mixing beaker 1000cc plastic mixing beaker 1162 ml 0,64 EUR



Mixing Bowl 2000 ml 180x180 mm - 2000 cc 0,91 EUR



Flexible mixing cup 500ml Flexible mixing bow 8,05 EUR



Mixing

Flexible mixing cup 1750ml Flexible mixing bowl 19,34 EUR



Syrenge 50ml Syringe 50 cc with catheter nozzle. 5,76 EUR



Wooden tongue spatula Mixing, resins, foams & rubbers. 3,42 EUR



stirring stick 22cm 220x17x3 mm 0,05 EUR



stirring stick 30cm strong stirring stick 0,24 EUR



Colad Turbomix /per 200 Paint stirrers stirrers in dispenser. 61,38 EUR



Turbine Mixer For use with electrical drill 16,11 EUR





Brushes

flat brush 30mm flat disposable brushes 0,80 EUR



flat brush 40mm flat disposable brushes 0,92 EUR



flat brush 50mm flat disposable brushes 1,39 EUR



flat brush 60mm flat disposable brushes 1,38 EUR



flat brush 70mm flat disposable brushes 1,39 EUR



Calupaint flat brush 40mm Calupaint flat brush 2,60 EUR



brush 40mm, wooden handle Brush, flat, 40mm, wooden handle. 2,84 EUR



polyesterkwast 20mm polyester brush 20mm round 3,09 EUR



polyesterkwast 25mm polyester brush 25mm round 3,51 EUR



polyesterkwast 35mm polyesterkwast 35mm 2,21 EUR



polyesterkwast 50mm polyesterkwast 50mm 3,46 EUR



Polyester kwast plat 75mm Polyester brush, Flat, 75 mm 3,33 EUR





Protective Gear

3M safety glasses Classic 3M safety glasses Classic 15,19 EUR



Glove Nitrile XL Glove Nitrile XL 11,01 EUR



Glove Nitrile M Glove Nitrile M 11,01 EUR



Glove Nitrile L Glove Nitrile L 11,01 EUR



Glove Nitrile S Glove Nitrile S 11,01 EUR



Paint spray mask Colad Complet easy to wear paint spray mask. 35,39 EUR



Filter ABEK1 For 3M 6200 maskers 36,87 EUR



Stenchmask carbon fibre Stenchmask carbon fibre 5,41 EUR



3M 06941 Halfgelaatmasker FFA1P2D 50,53 EUR





Release Agents

Spray Releases

Safety Info Acmos



Acmos 82 aerosol /400gr Removable universal release agent/ wax based / aerosol spraycan 20,63 EUR



Ease Release™ 200 /340 gr Ease Release™ 200 /340 gr 19,54 EUR



Ease Release™ 300 /340 gr Ease Release™ 300 /340 gr 18,22 EUR



Spray Releases

Safety Info Ease Release Group



Ease Release™ 400 /340 gr Ease Release™ 400 /340 gr 21,33 EUR



Ease Release™ 500 /340 gr Ease Release™ 500 /340 gr 22,30 EUR



Spray Releases

Safety Info Universal Mold Release



Universal™ Mold Release /400 gr Universal™ Mold Release /400 gr 17,05 EUR



Kwikee™ Sprayer - 946 ml Pressure Sprayer Kwikee™ Sprayer - 946 ml Pressure Sprayer 138,57 EUR





(C) 2010 / 2011 - All rights reserved

Print this page