Accu-Cast™ alginate

Thickened alginate mold material for detailed face molds.

• Sets in 5 minutes at 32°C
• Mix 1:4 by weight or 2:3 by volume
• Use with LiquiStone™ for casting
• Not for dental use

Alginate mold material for detailed lifecasting of hands, feet, and other body parts.

• Mix ratio: 1 part powder to 4 parts water by weight
• Sets in 5 minutes at 21°C
• Compatible with LiquiStone™, plaster, and urethane resin
• Temporary molds

Fiber-reinforced alginate mold material for Temporary lifecasting molds over large body areas.

• Sets in 8 minutes at 27°C
• Compatible with LiquiStone™, Smooth-Cast™ 300Q
• Mix ratio: 1:3 by weight, 1:1 by volume
• Specific Volume: 1.02 cm³/g (26 cu.in./lb)
• Not for dental use

Skin-safe alginate for lifecasting baby and child hands and feet.

• Mix ratio: 1:4 powder-to-water by weight
• Working time: 2 minutes
• Set time: 3 minutes
• Color change from pink to white
• Fill with gypsum or resins

Create a detailed hand sculpture with this kit.

• Includes HandGel alginate and LiquiStone gypsum cement
• Comes with a 4-quart molding bucket
• Contains clay for long fingernails
• Includes an illustrated procedural guide
• Rated 2/10 in difficulty

Fast-curing alginate mold material for prosthetic and orthotic duplication.

• Mixes with water, captures fine details
• Set time: 3 minutes
• Mix ratio: 1 part powder to 4 parts water by weight
• Working time: 2 minutes
• Off-white, forms rigid gel

A versatile gypsum cement for lifecasting.

• Mix ratio: 2 parts stone to 1 part water
• Working time: 15 minutes
• Demold time: 3 hours
• Full cure: 24 hours
• Compressive strength: 41.4 MPa (6000 psi)
• Minimal expansion: 0.42%