Holden's Frisket Mask Latex

HXFriskMask4oz ⓘ

Removable liquid latex masking fluid for surfaces such as paper, cardboard, ceramics, glass, leather, metal, and wood.

Non-staining, can be colored
Compatible with water-based mediums
Suitable for paper, glass, and metal
Not recommended for fabrics
Ensure surface is dry before application

€ 5.70

(€ 4.71 without 21% VAT)

Out of stock

Description

This removable liquid latex masking fluid is non-staining and can be colored. It is compatible with all water-based mediums and suitable for surfaces such as paper, cardboard, ceramics, glass, leather, metal, and wood. However, it is not recommended for use on fabrics.

Before applying, ensure the substrate is dry. Allow the masking fluid to dry completely before removing it to avoid damage.

Instructions

SAFETY FIRST

Keep out of reach of children.
Avoid use if you have known allergies to natural latex.
Avoid contact with eyes. If contact occurs, flush eyes with water for 15 minutes and seek medical attention.
Remove from skin with waterless hand cleaner followed by soap and water.
Children should not use this product without adult supervision.

PROCESSING RECOMMENDATIONS

Do not allow the product to freeze as it will become unusable.
Store and use at room temperature (23°C).
This product has a limited shelf life and should be used as soon as possible.
Colder temperatures slow working/cure time; warmer temperatures reduce it.
Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk.
Wash thoroughly after handling.
Keep the container closed when not in use.

POURING, USING & PERFORMANCEMIXING AND USING

Stir thoroughly before each use.
Apply 3 to 4 thin coats to any surface needing protection.
Dries to form a contour-hugging, skin-tight protective coating on both porous and non-porous surfaces.
Protects from damage during painting and prevents costly cleanup.
Prevents bleeding, peels away cleanly, and protects sensitive surfaces against staining and abrasion.

CLEAN UP

Clean up wet and dry latex with soap and water.

OPTIONAL - COLORING THE RUBBER

Fabtone™ latex colorants can be used to dye the latex while in its liquid state.

Specifications

Operating Temperature

23°C

Product	Cure Time	Shrinkage	Operating Temperature	Thinning Ratio	Available Colors	Shelf Life	Water Thinning Ratio	Storage Temperature	Recommended Loading Range	Color	Viscosity	Pressure For Injection	Volume For Adult Cadaver	Cure Time For Large Areas	Cure Time For Small Areas	Dry Time Between Layers	Final Dry Time	Accelerated Dry Temperature	Dwell Time For 1/16-inch Thickness	Dwell Time For 1/4-inch Thickness	Drying Time In Mold	Full Cure Time	Specific Gravity	Solids Content	Copper Content	Manganese Content	Potassium Hydroxide (KOH)	Mechanical Stability	Accelerated Cure Time	Minimum Layers For Thickness	Thickness For Smaller Items	Thickness For Larger Items	Full Cure Temperature Range	Full Cure Time At Elevated Temperature
Holden's Body Latex™ - Brushable	5-10 min.	3%	23°C	1% distilled water	Natural, Black, White	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Coating/Dipping Latex	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Cosmetic Latex™	5-10 min.	3%	23°C	-	-	-	1%	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's FabTone™	-	-	-	-	-	-	-	23°C	0.3% to 10% of total system weight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's FabTone™ Fluor	-	-	-	-	-	-	-	23°C	0.3% to 10% of total system weight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Frisket Mask Latex	-	-	23°C	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's HX-Injection Medium™ Latex	-	-	23°C	-	-	-	-	-	-	Blue, Red	Low	1 Kpa	1 liter	Up to 1 week	1-2 days	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mask Making Latex - Brushable HX-807™	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	1 h.	12 h.	38.7°C	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mask Making Latex - Pourable HX-407™	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	-	-	-	30 min	2 h.	12 h.	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mold Making Latex High Viscosity HX-974™	-	5-10%	-	-	-	-	-	< 49°C	-	White	7,000-9,000 cps	-	-	-	-	-	-	-	-	-	-	7 days at 23°C	0.95	56-60%	< 8 ppm	< 8 ppm	0.800000	650 sec.	8-12 h. at 43-49°C	10 layers	0.16 cm	0.32 cm	-	-
Holden's Mold Making Latex HX-80™	7 days at 23°C	-	23°C	-	-	Limited	-	Below 49°C	-	Natural	Low	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10 layers	0.16 cm	0.32 cm	43°C to 49°C	8-12 h.

Why buy at FormX?

Dedication to Materials

For over thirty years we have sought out the highest quality modelling, moulding and casting materials from around the world.
Inspiring + Unique

From silicones and resins to Jesmonite and special effects materials — a curated range for professionals, artists and makers.
Expert Advice

Our sales team is widely known for their knowledge and dedication, supporting you in mould making, casting, sculpture and prototyping.
Shipping Across Europe

We ship from our warehouses in Amsterdam, Barcelona and Madrid to customers throughout Europe, from Greece up to Norway.
Amsterdam Original

Founded in Amsterdam, FormX grew from a local art foundry into a major European supplier — with our roots firmly in the city.

FormX is specialized in the supply of the highest quality 3D modelling and reproduction materials available and has warehouses and showrooms in Amsterdam, Barcelona and Madrid.

Legal

Webshop

About

Community

This website has been developed by Usecue B.V.
© 2026 FormX B.V.