Free Form™ Habitat™ Fire Safe™

FreeFormHFSpint ⓘ 12E4AB7F-0BFB-D54F-8819-F587921E4D39

A lightweight, fire-rated epoxy putty for sculpting props and themed environments.

  • Low odor and minimal shrinkage
  • Solvent-free and safe for indoor use
  • Shore D hardness of 85
  • Heat resistance up to 74°C
  • Meets E84 Class A flame rating
exclamation.svg

Warning

H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
€ 57.63

(€ 47.63 without 21% VAT)

In stock

Description

This lightweight, fire-rated epoxy putty is designed for sculpting, props, themed environments, models, and display elements. It features low odor and minimal shrinkage, making it safe for indoor and aquarium use. The putty is solvent-free and can be easily mixed by hand into a dough-like consistency, allowing for sculpting, carving, or pressing into molds. It cures to a rigid, machinable surface with a Shore D hardness of approximately 85.

Features

  • Working time of about 90 minutes
  • Full cure in 16 hours at room temperature
  • Heat resistance up to 74°C after room-temperature cure
  • Post-curing enhances heat resistance
  • Meets E84 Class A flame rating standards
  • Neutral grey color for easy painting or finishing

This epoxy putty is suitable for professional and artistic applications requiring durability and fire safety.

Instructions

Safety

  • Use in a well-ventilated area.
  • Wear a NIOSH-approved respirator if using regularly.
  • Wear safety glasses, long sleeves, and nitrile or vinyl gloves.

Rate Of Coverage

At 6.3 mm thickness, 454 g covers approximately 462 cm².

Preparation

  • Store and use at 23°C.
  • Mix in a well-ventilated area.
  • Use Folding Powder on the work surface and gloves to prevent sticking.
  • Conduct a test application if needed.

Applying A Release Agent

Use Ease Release™ 200 or 205 for non-porous surfaces.

Measuring

  • Dispense equal amounts of Part A and Part B.

Mixing

  • Mix by hand with gloves coated in Folding Powder.
  • Knead parts A+B, adding powder for desired consistency.
  • Apply to surfaces; elevated temperatures reduce pot life and cure time.

Stamp, Sculpt or Mold

  • Stamp with rubber stamps using alcohol for detail.
  • Sculpt with hands or tools.
  • Press into silicone molds for detail reproduction.

Smoothing Surface

  • Use water or isopropyl alcohol.
  • Cover with plastic wrap for a high gloss finish.

Curing and Heat Resistance

  • Cures in 16 hours at room temperature.
  • Heat accelerates cure time.
  • Resists temperatures up to 74°C.

Post Curing

  • For higher heat resistance, cure at 80°C for two hours, then 100°C for three hours.

Machining

  • Wear a dust mask when machining cured epoxy.

Painting

  • Prime and paint with acrylic enamel for outdoor use.

Removing Uncured Material

  • Remove excess material and clean with soap and water.

Specifications

Color Grey
Mixed Viscocity Dough
Cure Time 16 hours
Pot Life 90 minutes
Specific Volume 17.3 cu. in./lb.
Specific Gravity 1.44 g/cc
Mix Ratio By Weight 1A:1B
Mix Ratio By Volume 1A:1B
Shore D Hardness 85
Heat Deflection Temp 160 °F
Heat Deflection With Post Cure 212 °F
Product Specific Gravity Specific Volume Heat Deflection Temp Bouyant Force Mixed Viscocity Mix Ratio By Volume Mix Ratio By Weight Shore D Hardness Color Mixed Viscocity Specific Volume Bouyant Force Specific Gravity Mix Ratio By Weight Mix Ratio By Volume Shore D Hardness Heat Deflection Temp Mixed Viscosity Cure Time Shrinkage Pot Life Cure Time Pot Life Shrinkage Heat Deflection With Post Cure Heat Deflection With Post Cure Tensile Strength Compressive Strength Tensile Strength Compressive Strength Shore A Hardness Shore A Hardness Operating Temperature Range Mix Ratio Drying Time Coverage Per Pint Coverage Per Gallon Adhesion Promoter Coverage Dry Film Thickness Final Cure Time Maximum Humidity Optimal Storage Temperature Nozzle Tip Size For Airbrush Nozzle Tip Size For Touch-Up Gun Nozzle Tip Size For Spray Gun Spray Pressure For Airbrush Spray Pressure For Touch-Up Gun Spray Pressure For Spray Gun Storage Temperature VOC Content Flame Rating Humidity Limit Mix Ratio For Flex Additive Spray Gun Nozzle Size Airbrush Nozzle Size Touch-Up Gun Nozzle Size Spray Pressure Blacklight Clear Top-Coating Cure Time Blacklight Clear Top-Coating Dry Time Airbrush Pressure Touch-Up Gun Pressure Spray Gun Pressure Maximum Humidity For Application Drying Time At Room Temperature Coverage Per Gallon Of Adhesion Promoter Airbrush Nozzle Tip Size Touch-Up Gun Nozzle Tip Size Spray Gun Nozzle Tip Size Shelf Life After Mixing Spray Tip Size Composition Dry Film Thickness Per Coat Thinning For Airbrush Thinning For Spray Gun Adhesion Promoter Coverage Per Gallon ASTM Fire Rating Shelf Life
Free Form™ Detailer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ AIR 0.45 g/cc 61.6 cu. in./lb. 140 °F 10.4 lb/ft³ Dough 1A:1B 1A:1B 50 Grey Dough 61.6 cu. in./lb. 10.4 lb/ft³ 0.45 g/cc 1A:1B 1A:1B 50 140 °F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form Air Fire Safe - - - - - - - - Grey - 34.6 cu. in./lb. - 0.8 g/cc - 1A:1B 73 140 °F Dough - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ SCULPT 1.33 g/cc 20.73 cu. in./lb. 150 °F - Putty 1A:1B - 80 Grey Putty 20.73 cu. in./lb. - 1.33 g/cc - 1A:1B 80 150 °F - 24 h. <.001 in. / in. 1.5 h. 24 h. 1.5 h. <.001 in. / in. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ AIR HT 0.51 g/cc 54.31 cu. in./lb. 300 °F - Dough 2A:1B 2A:1B 55 Grey Dough 54.31 cu. in./lb. - 0.51 g/cc 2A:1B 2A:1B 55 300 °F - 16 h. - 150 min. 16 h. 150 min. - 400 °F 400 °F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ Habitat™ Black 1.6 g/cc 17.3 cu. in./lb. 160 °F - Dough 1A:1B 1A:1B 85 Black Dough 17.3 cu. in./lb. - 1.6 g/cc 1A:1B 1A:1B 85 160 °F - 16 h. - 60 min. 16 h. 60 min. - 212 °F 212 °F 3,480 psi 14,390 psi 3,480 psi 14,390 psi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ AIR FAST 0.45 g/cc 61.6 cu. in./lb. 145 °F 10.4 lb/ft³ Dough 1A:1B 1A:1B 60 Grey Dough 61.6 cu. in./lb. 10.4 lb/ft³ 0.45 g/cc 1A:1B 1A:1B 60 145 °F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ Habitat™ Fire Safe™ 1.44 g/cc 17.3 cu. in./lb. 160 °F - Dough 1A:1B 1A:1B 85 Grey Dough 17.3 cu. in./lb. - 1.44 g/cc 1A:1B 1A:1B 85 160 °F - 16 h. - 90 min. 16 h. 90 min. - 212 °F 212 °F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Free Form™ Habitat™ Flex FR 1.55 g/cc 17.9 cu. in./lb. - - Dough 1A:1B 1A:1B - Light Brown Dough 17.9 cu. in./lb. - 1.55 g/cc 1A:1B 1A:1B - - - 24 h. - 90 min. 24 h. 90 min. - - - - - - - 90 90 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Habitat Cast N Coat™ 1.51 g/cc 18.35 cu. in./lb. 131 °F - 13,500 cps 1A:1B 1A:1B 85 Tan 13,500 cps 18.35 cu. in./lb. - 1.51 g/cc 1A:1B 1A:1B 85 131 °F - 16 h. - 85 min. 16 h. 85 min. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Habitat™ Folding Powder - - - - – - - - - – - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Maker Pro Paint™ Flex Additive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16°C to 29°C 1:1 by volume 10 - 15 min. 43 sq ft (4 sq meters) 350 sq ft (33 sq meters) 600 sq ft (56 sq meters) 1.5 - 2 mils per coat 48 h. 65% 23°C 0.3mm - 0.5mm 1.2mm 1.2mm - 1.4mm 25 – 35+ psi 22 – 24 psi 22 – 24 psi - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Maker Pro Paint™ Fluorescent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16°C to 29°C - 10 - 15 min. 4 sq meters 33 sq meters 56 sq meters 1.5 - 2 mils 48 h. - - - - - - - - 23°C Low ASTM E-84, Class A 65% relative humidity 1:1 by volume 1.2mm – 1.4mm 0.3mm - 0.5mm 1.2mm 22 – 35 psi 48 h. 30 min. - - - - - - - - - - - - - - - - - -
Maker Pro Paint™ Adhesion Promoter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16°C to 29°C - - 4 sq meters at 1.5 - 2 mils dry film thickness 33 sq meters at 1.5 - 2 mils dry film thickness - - 48 h. - 23°C - - - - - - - - - - 1:1 by volume - - - - - - 25 – 35+ psi 22 – 24 psi 22 – 24 psi 65% 10 to 15 min. 56 sq meters at 1.2 - 1.5 mils dry film thickness 0.3mm - 0.5mm 1.2mm 1.2mm – 1.4mm - - - - - - - - -
Maker Pro Paint™ Reducer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10% by volume - - - - - - - - - - - - - - 23°C - - - - - - - - - - - - - - - - - - - 24 h. 1.2mm and smaller - - - - - - -
Maker Pro Paint™ Standard Colors - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16°C to 29°C - 10 - 15 min. 4 sq meters 33 sq meters 56 sq meters - 48 h. - - - - - - - - 23°C Low ASTM E-84, Class A 65% relative humidity 1:1 by volume 1.2mm – 1.4mm 0.3mm - 0.5mm 1.2mm - - - 25 – 35+ psi 22 – 24 psi 22 – 24 psi - - - - - - - - Water-based acrylic-urethane 1.5 - 2 mils 25% - 50% of total paint volume 10% - 20% of total paint volume - - -
Buddy Rhodes™ Vertical Mix™ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Maker Pro Paint™ Metallics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16°C to 29°C - 10 - 15 min. 4 sq meters 33 sq meters - - - 65% - - - - - - - 23°C - - - 1:1 by volume 1.2mm – 1.4mm 0.3mm - 0.5mm 1.2mm - - - 25 – 35+ psi 22 – 24 psi 22 – 24 psi - - - - - - - - - 1.5 - 2 mils - - 56 sq meters ASTM E-84, Class A -
Buddy Rhodes™ Ramp - - - - - - - - - - - - - 34:3:7.5 (Vertical Mix:RAMPTM:Water) 1 Bag:42 fluid oz:115 fluid oz (Vertical Mix:RAMPTM:Water) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23°C - - - - - - - - - - - - - - - - - - - - - - - - - - - Limited

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.