Holden's Body Latex™ - Brushable

Description

This high-grade natural liquid latex is designed for body painting and creating three-dimensional effects. Its high solids content and viscosity make it suitable for painting on people and surfaces. It is used for making paintable clothing, costumes, masks, slip-casting, mold-making, and special effects.

• Can be tinted with FABTONE colors
• Thinned with about 1% distilled water for airbrush application
• Certified as 'Skin Safe' by an independent lab
• Not recommended for individuals allergic to latex

Always read the label carefully and consult a doctor if unsure about allergies. If an allergic reaction occurs, discontinue use and seek medical attention. The latex is naturally colored.

Instructions

SAFETY FIRST:

• Keep out of reach of children.
• Avoid use if you have known allergies to natural latex.
• Avoid contact with eyes. Flush with water for 15 minutes and seek medical attention if contact occurs.
• Remove from skin with waterless hand cleaner followed by soap and water.
• Children should use this product only under adult supervision.

• Do not allow Body Latex to freeze; it will become unusable.
• Store and use at room temperature (23°C).
• Use as soon as possible due to limited shelf life.
• Colder temperatures slow curing; warmer temperatures reduce working time.
• Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk.

• Do not use on individuals with known latex allergies.
• Perform a small-scale test on the inside of the arm to check for sensitivity.
• If a rash appears, wash thoroughly with mild soap and warm water and avoid future use.
• Remove body hair from areas to be coated with latex to prevent bonding.
• If latex gets into hair, remove it in the shower with soap.
• Apply moisturizing lotion before latex to facilitate easy removal.
• Avoid application over eyes, ears, nose, and mouth.
• For external use only; do not apply on inflamed, patchy, acne-prone, or damaged skin.

1. Apply Body Latex with a sponge, fingers, or brush directly to the skin.
2. Thin with 1% distilled water for airbrush use.
3. Apply several coatings for best results; each layer cures in 5-10 minutes at body temperature.
4. Use a hair dryer to speed up curing.
5. Body latex shrinks about 3%, creating a 'second skin' effect.
6. Powder the latex to prevent sticking once desired thickness is achieved.

1. Rinse the area with warm water.
2. Lather with soap or body wash.
3. Massage with a scrubber or hands to peel off latex gently.
4. Use a warm cloth to soothe the skin during removal.
5. Longer wear time eases removal due to natural body oils.

Specifications