Description
Buddy Rhodes Water Reducer 205 is a high-performance powdered plasticizer and pozzolan blend designed to improve the workability, density, and strength of concrete in creative and architectural applications. It is particularly suited for GFRC, wet-cast, precast, SCC, and high-performance mixes. This product reduces the water needed while maintaining excellent fluidity and flow.
By lowering the water-to-cement ratio, Water Reducer 205 enhances compressive strength, reduces porosity, and improves long-term durability. It is ideal for creating thin, strong sections in countertops, furniture, art pieces, and decorative concrete where precision and performance are crucial.
The product provides a more workable consistency for pouring into detailed molds, aids fiber dispersion in GFRC, and produces smoother finished surfaces with cleaner edges and fewer air pockets. Its pozzolanic properties enhance hydration and matrix density, leading to better resistance to abrasion and environmental wear.
The typical dosage ranges from 0.5% to 10% of the cement weight, depending on the desired flow and application requirements. Careful testing is recommended to determine the optimal level for each specific mix design. With proper use, Buddy Rhodes Water Reducer 205 helps to deliver beautifully cast concrete elements with superior handling, finish, and structural performance.
Instructions
Measure the required amount of Buddy Rhodes Water Reducer 205 based on the total cement weight of the mix, typically between 0.5% and 10%. Add the powder to the dry concrete ingredients and blend thoroughly to ensure even distribution. Gradually add water while mixing until the desired workability and flow are achieved. The water reducer will increase fluidity while allowing a lower water-to-cement ratio. Continue mixing until the concrete is smooth and fully combined. Place the concrete into molds or forms and consolidate as needed to remove air pockets. Always perform small test batches to determine the optimal dosage for your specific mix and application. Clean tools and equipment after use.
