Holden's HX-Injection Medium™ Latex

HXInjectionMedBluX ⓘ A6C87FA7-370E-B441-8A5B-F12735A4A5DB

Low viscosity latex injection medium for medical and veterinary training.

  • Available in blue and red
  • Highlights veins and arteries
  • Inject 2 weeks post-embalming
  • Solidifies in up to a week
environment.svg

Warning

H411 - Toxic to aquatic life with long lasting effects.
€ 126.67

(€ 104.69 without 21% VAT)

In stock

Description

This low viscosity latex is designed for medical and veterinary training. 

Holden's HX-Injection Medium™ is available in blue and red, and is injected into a cadaver's blood vessels to make arteries and veins visible during dissections. 

The red medium highlights arteries, while the blue medium highlights veins.

It enhances the identification of vascular structures, aiding in educational and training settings.

Instructions

Processing Recommendations

  • Safety First: Keep out of reach of children. Avoid use if you have known latex allergies. Avoid contact with eyes; flush with water for 15 minutes and seek medical attention if contact occurs. Remove from skin with waterless hand cleaner, then soap and water. Children should only use this product under adult supervision.

General Preparation:

  • Do not allow the medium to freeze, as this renders it unusable.
  • Store and use at room temperature (23°C).
  • Use as soon as possible due to limited shelf life.
  • Colder temperatures slow curing; warmer temperatures reduce working time.
  • Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk.
  • Wash thoroughly after handling. Do not eat, drink, or smoke in the work area.
  • Keep the container closed when not in use.

Pouring, Using & Performance:

  • Mixing and Using: Stir before use. Approximately 1 liter is sufficient for an adult cadaver. 
  • Inject the medium 2 weeks after embalming. Use a syringe for smaller areas or a pressure pump (~1 kPa) for larger areas. 
  • Solidification can take up to a week, while smaller areas may be ready in 1-2 days.

Clean Up: Clean wet and dry latex with soap and water.

Specifications

Color Blue, Red
Viscosity Low
Operating Temperature 23°C
Pressure For Injection 1 Kpa
Volume For Adult Cadaver 1 liter
Cure Time For Large Areas Up to 1 week
Cure Time For Small Areas 1-2 days
Product Cure Time Shrinkage Operating Temperature Thinning Ratio Available Colors Shelf Life Water Thinning Ratio Storage Temperature Recommended Loading Range Color Viscosity Pressure For Injection Volume For Adult Cadaver Cure Time For Large Areas Cure Time For Small Areas Dry Time Between Layers Final Dry Time Accelerated Dry Temperature Dwell Time For 1/16-inch Thickness Dwell Time For 1/4-inch Thickness Drying Time In Mold Full Cure Time Specific Gravity Solids Content Copper Content Manganese Content Potassium Hydroxide (KOH) Mechanical Stability Accelerated Cure Time Minimum Layers For Thickness Thickness For Smaller Items Thickness For Larger Items Full Cure Temperature Range Full Cure Time At Elevated Temperature
Holden's Body Latex™ - Brushable 5-10 min. 3% 23°C 1% distilled water Natural, Black, White - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's Coating/Dipping Latex - - 23°C - - Limited - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's Cosmetic Latex™ 5-10 min. 3% 23°C - - - 1% - - - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's FabTone™ - - - - - - - 23°C 0.3% to 10% of total system weight - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's FabTone™ Fluor - - - - - - - 23°C 0.3% to 10% of total system weight - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's Frisket Mask Latex - - 23°C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Holden's HX-Injection Medium™ Latex - - 23°C - - - - - - Blue, Red Low 1 Kpa 1 liter Up to 1 week 1-2 days - - - - - - - - - - - - - - - - - - -
Holden's Mask Making Latex - Brushable HX-807™ - - 23°C - - Limited - - - - - - - - - 1 h. 12 h. 38.7°C - - - - - - - - - - - - - - - -
Holden's Mask Making Latex - Pourable HX-407™ - - 23°C - - Limited - - - - - - - - - - - - 30 min 2 h. 12 h. - - - - - - - - - - - - -
Holden's Mold Making Latex High Viscosity HX-974™ - 5-10% - - - - - < 49°C - White 7,000-9,000 cps - - - - - - - - - - 7 days at 23°C 0.95 56-60% < 8 ppm < 8 ppm 0.800000 650 sec. 8-12 h. at 43-49°C 10 layers 0.16 cm 0.32 cm - -
Holden's Mold Making Latex HX-80™ 7 days at 23°C - 23°C - - Limited - Below 49°C - Natural Low - - - - - - - - - - - - - - - - - - 10 layers 0.16 cm 0.32 cm 43°C to 49°C 8-12 h.

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.