Holden's FabTone™ Fluor

HXFabtoneFlYel2oz ⓘ

Color

blue green pink yellow

Size

Concentrated pigments for liquid latex.

Excellent dispersion and consistent color
Use 0.3% to 10% of total system weight
Avoid overloading to prevent leaching
Available in Fluor Green

€ 7.34

(€ 6.07 without 21% VAT)

In stock

Description

These latex colorants are concentrated pigments designed for use with liquid latex, ensuring excellent dispersion and consistent color quality. A small amount can color a large volume of liquid latex, allowing for dramatic color effects based on the proportion used. The recommended loading range is 0.3% to 10% of the total system weight. Exceeding this range may cause leaching. Available in Fluor Green.

Instructions

GENERAL PREPARATION:

Store and use at or near 23°C.
Wear vinyl gloves to prevent skin contact.
These colorants are concentrated; a small amount goes a long way.
Recommended loading range is 0.3% to 10% of total latex system weight.
Determine the amount to add based on desired color intensity.
If new to coloring liquid latex, test by adding a few drops to a small amount of material and observe the outcome.
Avoid overloading the liquid latex rubber to prevent color leaching.
Pre-mix thoroughly before use as settling may have occurred.
Mix well with liquid latex rubber before application.
Custom colors can be created by blending different colorants.
Small scale testing is recommended before using substantial amounts for any project.

Specifications

Storage Temperature	23°C
Recommended Loading Range	0.3% to 10% of total system weight

Product	Cure Time	Shrinkage	Operating Temperature	Thinning Ratio	Available Colors	Shelf Life	Water Thinning Ratio	Storage Temperature	Recommended Loading Range	Color	Viscosity	Pressure For Injection	Volume For Adult Cadaver	Cure Time For Large Areas	Cure Time For Small Areas	Dry Time Between Layers	Final Dry Time	Accelerated Dry Temperature	Dwell Time For 1/16-inch Thickness	Dwell Time For 1/4-inch Thickness	Drying Time In Mold	Full Cure Time	Specific Gravity	Solids Content	Copper Content	Manganese Content	Potassium Hydroxide (KOH)	Mechanical Stability	Accelerated Cure Time	Minimum Layers For Thickness	Thickness For Smaller Items	Thickness For Larger Items	Full Cure Temperature Range	Full Cure Time At Elevated Temperature
Holden's Body Latex™ - Brushable	5-10 min.	3%	23°C	1% distilled water	Natural, Black, White	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Coating/Dipping Latex	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Cosmetic Latex™	5-10 min.	3%	23°C	-	-	-	1%	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's FabTone™	-	-	-	-	-	-	-	23°C	0.3% to 10% of total system weight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's FabTone™ Fluor	-	-	-	-	-	-	-	23°C	0.3% to 10% of total system weight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Frisket Mask Latex	-	-	23°C	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's HX-Injection Medium™ Latex	-	-	23°C	-	-	-	-	-	-	Blue, Red	Low	1 Kpa	1 liter	Up to 1 week	1-2 days	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mask Making Latex - Brushable HX-807™	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	1 h.	12 h.	38.7°C	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mask Making Latex - Pourable HX-407™	-	-	23°C	-	-	Limited	-	-	-	-	-	-	-	-	-	-	-	-	30 min	2 h.	12 h.	-	-	-	-	-	-	-	-	-	-	-	-	-
Holden's Mold Making Latex High Viscosity HX-974™	-	5-10%	-	-	-	-	-	< 49°C	-	White	7,000-9,000 cps	-	-	-	-	-	-	-	-	-	-	7 days at 23°C	0.95	56-60%	< 8 ppm	< 8 ppm	0.800000	650 sec.	8-12 h. at 43-49°C	10 layers	0.16 cm	0.32 cm	-	-
Holden's Mold Making Latex HX-80™	7 days at 23°C	-	23°C	-	-	Limited	-	Below 49°C	-	Natural	Low	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10 layers	0.16 cm	0.32 cm	43°C to 49°C	8-12 h.

Why buy at FormX?

Dedication to Materials

For over thirty years we have sought out the highest quality modelling, moulding and casting materials from around the world.
Inspiring + Unique

From silicones and resins to Jesmonite and special effects materials — a curated range for professionals, artists and makers.
Expert Advice

Our sales team is widely known for their knowledge and dedication, supporting you in mould making, casting, sculpture and prototyping.
Shipping Across Europe

We ship from our warehouses in Amsterdam, Barcelona and Madrid to customers throughout Europe, from Greece up to Norway.
Amsterdam Original

Founded in Amsterdam, FormX grew from a local art foundry into a major European supplier — with our roots firmly in the city.

FormX is specialized in the supply of the highest quality 3D modelling and reproduction materials available and has warehouses and showrooms in Amsterdam, Barcelona and Madrid.

Legal

Webshop

About

Community

This website has been developed by Usecue B.V.
© 2026 FormX B.V.