Ease Release™ 300 Aerosol

Description

Ease Release 300 is a high performance, production proven release agent formulated for polyurethane elastomers and epoxy resins along with excellent release of polyurethane elastomers and microcellular foams. Ease Release 300 leaves very little build-up on the molds resulting from isocyanate or epoxy reactions, while maintaining part cleanability with common degreasing solvents. Cleaned parts molded with Ease Release 300 can be painted or bonded. Ease Release 300 is effective on all mold surfaces such as steel, aluminum, chrome, epoxy, and RTV urethane and silicone mold materials.

Instructions

Core Functionality & Performance

• Advanced Chemical Resistance: Formulated to withstand isocyanate and epoxy reactions, leaving minimal buildup on mold surfaces, thus reducing maintenance and increasing production uptime.
• Surface Integrity: Molded parts maintain excellent cleanability. After wiping with common degreasing solvents, parts can be painted or bonded without adhesion failure.
• Thermal Versatility: Effective across a temperature range of 21°C to 260°C, suitable for both room-temperature and heat-accelerated curing cycles.

Technical Features

• Universal Substrate Compatibility: Works on various mold materials, including steel, aluminum, chrome, epoxy, and flexible RTV urethane and silicone molds.
• High-Fidelity Detail: Ultra-thin film allows precise duplication of intricate mold textures and details.
• Aesthetic Finish: Provides a clean, glossy surface finish to the final cast part.
• Operational Efficiency: Fast-drying and easy to apply, available in aerosol or liquid form, facilitating rapid manufacturing workflow.

Processing Instructions

1. Preparation: Ensure the mold surface is clean and free of previous residues. For new or porous molds, a sealer may be required before applying the release agent.
2. Application:
   • Aerosol: Hold the can 15–25 cm from the surface and apply a light, even mist.
   • Liquid: Brush or wipe onto the surface in a thin, uniform layer.
3. Flash-off: Allow the solvent to evaporate completely (usually 1–3 minutes) before pouring the resin or rubber.
4. Post-Molding: To prepare the cast part for painting or gluing, clean the surface with a solvent such as Acetone or Isopropyl Alcohol to remove any residual release film.

Specifications