Free Form™ AIR FAST

FreeFormAirFastPint ⓘ 320EF6B1-6380-EC4A-B3D6-1A43C5E392A8
Epoxy Clay

Quick-curing, lightweight, epoxy putty that hardens in minutes.

  • Shore Hardness: 60D
  • Mix Ratio: 1A:1B by volume
  • Buoyant and lightweight
  • Compatible with multiple materials
  • Cures underwater
exclamation.svg health-hazard.svg corrosion.svg

Warning

H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H314 - Causes severe skin burns and eye damage.
H373 - May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
€ 52.65

(€ 43.51 without 21% VAT)

In stock

Description

This epoxy putty cures rapidly into a hard, lightweight plastic. It consists of two parts, A and B, mixed in equal amounts by hand. At room temperature, a 60-gram mass has a working time of 6 minutes and becomes tack-free in 30 minutes. The putty can be colored with UVO™ pigments and manipulated while in its 'green' state. Once cured, it is buoyant, easily carved, sanded, and painted. It is compatible with other similar products.

Applications

  • Quick rough shaping, filling voids, and repairs.
  • Bonds to plastics, metals, wood, and ceramics.
  • Marine repairs and can cure underwater.
  • Filleting material or for jig/fixture construction in epoxy tooling.
  • Laminated between layers of EpoxAmite™ and fiberglass for lightweight composites.

Technical Specifications

  • Thickness 1.27 cm: 6-minute pot life, 30-minute handling time, 24-hour full cure.
  • Thickness 0.95 cm: 8-minute pot life, 45-minute handling time, 24-hour full cure.
  • Thickness 0.32 cm: 10-minute pot life, 2-hour handling time, 24-hour full cure.
  • Mix Ratio: 1A:1B by volume.
  • Shore Hardness: 60D.
  • Color: Grey.

Instructions

Safety

  • Use in a well-ventilated area. A NIOSH-approved respirator is recommended for regular use.
  • Wear safety glasses, long sleeves, and rubber gloves. Use nitrile or vinyl gloves only.

Mixing and Application

  • Mix in small increments due to heat generation. Avoid mixing amounts larger than a tennis ball.
  • Store and use materials at 23°C. Conduct a small test application if unsure of suitability.

Applying a Release Agent

  • Use Sonite Wax™ for non-porous surfaces to prevent adhesion.

Mixing and Measuring

  • Dispense equal amounts of Part A and Part B. Mix by hand to a uniform color within 60 seconds.

Applying and Laminating

  • Spray a light mist of water as a primer before application.
  • Apply up to 1.27 cm thickness. Can be used with EpoxAcoat™ and EpoxAmite™ for composites.

Smoothing and Painting

  • Use isopropyl alcohol to smooth the surface.
  • Paint with acrylic enamel paints after curing.

Curing and Heat Resistance

  • Refer to cure times based on mass. Fully cured putty resists temperatures up to 63°C.

Removing Uncured Epoxy

  • Remove excess material and clean residue with soap and water. E-POX-EE KLEENER™ is optional for cleaning.

Specifications

Color Grey
Mixed Viscocity Dough
Specific Volume 61.6 cu. in./lb.
Bouyant Force 10.4 lb/ft³
Specific Gravity 0.45 g/cc
Mix Ratio By Weight 1A:1B
Mix Ratio By Volume 1A:1B
Shore D Hardness 60
Heat Deflection Temp 145 °F
Available in Epoxy Clay
Product Specific Gravity Specific Volume Color Heat Deflection Temp Bouyant Force Mixed Viscocity Mix Ratio By Volume Mix Ratio By Weight Shore D Hardness Color Mixed Viscocity Specific Volume Bouyant Force Specific Gravity Mix Ratio By Weight Mix Ratio By Volume Shore D Hardness Heat Deflection Temp Mixed Viscosity Cure Time Heat Deflection With Post Cure Pot Life Cure Time Pot Life Heat Deflection With Post Cure
Free Form™ AIR 0.45 g/cc 61.6 cu. in./lb. Grey 140 °F 10.4 lb/ft³ Dough 1A:1B 1A:1B 50 Grey Dough 61.6 cu. in./lb. 10.4 lb/ft³ 0.45 g/cc 1A:1B 1A:1B 50 140 °F - - - - - - -
Free Form™ AIR FAST 0.45 g/cc 61.6 cu. in./lb. Grey 145 °F 10.4 lb/ft³ Dough 1A:1B 1A:1B 60 Grey Dough 61.6 cu. in./lb. 10.4 lb/ft³ 0.45 g/cc 1A:1B 1A:1B 60 145 °F - - - - - - -
Free Form Air Fire Safe - - - - - - - - - Grey - 34.6 cu. in./lb. - 0.8 g/cc - 1A:1B 73 140 °F Dough - - - - - -
Free Form™ AIR HT 0.51 g/cc 54.31 cu. in./lb. Grey 300 °F - Dough 2A:1B 2A:1B 55 Grey Dough 54.31 cu. in./lb. - 0.51 g/cc 2A:1B 2A:1B 55 300 °F - 16 h. 400 °F 150 min. 16 h. 150 min. 400 °F

Why buy at FormX?

Subscribe to our Newsletter

Stay up to date with the latest offers

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.