CalCast

CalCast100 ⓘ 7FAD5F92-E582-E549-8C2F-B792C6CB8DE3
Gypsum & Gypsum Products
CALCAST® 200 is a semi-hard plaster combining cost-effectiveness with hardness. Ideal for casting decorative items, wall bricks, panels, and ornaments. Available for pick-up in Amsterdam. Note: Weigh water first, add powder to water. Times are approximate, affected by temperature.
€ 25.05

(€ 20.70 without 21% VAT)

In stock

Description

CALCAST® 200 is a blended product consisting of β- and α – hemi hydrate. It is considered as a semi-hard plaster.It combines the cost effectiveness with a considerable hardness. pot life: 5 mins -Curing time:30 mins - water: 55 - 65gms - Powder:100gmsIt is mostly used for:- casting decorative items- imitation wall vricks- pre-fabricated panels cornices and ornaments- general use where a certain hardness is requiredCALCAST 200 IS ONLY AVAILABLE FOR PICK-UP FROM OUR SHOP IN AMSTERDAM ! Please note:1. ALWAYS weigh the water first and add the powder to the water, NEVER add water to thepowder.2. All times are approximate, remember both water and ambient temperature will affect these.

Instructions

Available in Gypsum & Gypsum Products
Product Expansion Weight Mix Ratio Set Time Product Name Color Compressive Strength Working Time Density Demold Time Water Absorption Flexural Ultimate Tensile Ultimate Impact Resistance Coefficient Of Thermal Expansion Water Vapor Diffusion Coefficient Freeze/Thaw Resistance Maximum Usable Temperature
CalCast - - - - - - - - - - - - - - - - - -
PlasterCast - - - - - - - - - - - - - - - - - -
MarbleCast - - - - - - - - - - - - - - - - - -
UltraCal Lowest of any rapid-setting gypsum cement 50 lbs 38 parts water by weight per 100 parts plaster 25-35 min. Ultracal-30 - - - - - - - - - - - - -
Plaster Bandage 5 roll Package - - - - - - - - - - - - - - - - - -
Plaster Bandage Single - - - - - - - - - - - - - - - - - -
Plaster Splints - - - - - - - - - - - - - - - - - -
Gypsum Retarder - - - - - - - - - - - - - - - - - -
Forton VF-812 - - Alpha Gypsum 100, VF-812 Polymer 50, MF-415 Resin 10, Hardener 0.48 - - Bright White 6,000-9,000 psi (41-62 MPa) 20-30 min. 95-100 lbs/ft³ 60-90 min. 0.8% after 24 h. water soak 3,500-9,400 psi (24-65 MPa) 3,500-5,100 psi (24-35 MPa) 170 in.lb./in² 11.1 x 10⁻⁶ in/in/°F 250 mμ 300 cycles 200°F (93°C)
Melamine Dry Resin - - - - - - - - - - - - - - - - - -
Recommended products

Why buy at FormX?

Subscribe to our Newsletter

Stay up to date with the latest offers

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.