APHIX™
Buy Smooth-On at FormX
Smooth-On is one of the world’s leading manufacturers of 3D modeling materials such as mold-making, casting and special effects materials, as well as industrial casting resins, adhesives and equipment. FormX is the main distributor of Smooth-On products in Europe.
APHIX™ Silicone Adhesion Promoter will temporarily adhere most surgical tapes, bandages, dressings, etc. to silicone rubber surfaces including training mannequins, devices, etc.
This non-VOC formula is a low viscosity liquid that brushes on easily and dries quickly. One application lasts for repeated use.
APHIX™ Silicone Adhesion Promoter can be removed with NOVOCS™ GLOSS silicone solvent.
Products
Aphix
...
Using APHIX™ Silicone Adhesion Promoter for Medica
Instructions
Important: Shake APHIX™ Silicone Adhesion Promoter container well before using. Preparation - Clean the silicone surface with NOVOCS™ GLOSS silicone solvent to remove any oils which may affect the bond of the APHIX™ adhesion. Allow surface to dry for 2 minutes.
APPLICATION & REMOVAL…
Application - APHIX™ Silicone Adhesion Promoter can be applied using a cotton swab, non-latex sponge or small fine bristle brush. Apply adhesive to the silicone surface. Allow APHIX™ Silicone Adhesion Promoter to dry for 10 minutes. APHIX™ Silicone Adhesion Promoter will not work unless it has thoroughly dried. Be sure to the securely replace cap after each use as contents will evaporate. Once APHIX™ Silicone Adhesion Promoter has dried, apply the adhesive surgical tape, bandage or dressing. One application of APHIX™ Silicone Adhesion Promoter lasts for repeated use. Removal of APHIX™ - APHIX™ Silicone Adhesion Promoter can be removed using NOVOCS™ GLOSS silicone solvent.
