EZ-Brush™ Vac Bag Silicone
Buy Smooth-On at FormX
Smooth-On is one of the world’s leading manufacturers of 3D modeling materials such as mold-making, casting and special effects materials, as well as industrial casting resins, adhesives and equipment. FormX is the main distributor of Smooth-On products in Europe.
Brushable Platinum Silicone Rubber
EZ-Brush™ Vac Bag is a brushable, Platinum-Cure Silicone Rubber developed especially for fabricating reusable vacuum bags by hand. No spray equipment is required EZ-Brush™ Vac Bag Silicone has a 1A:1B by volume mix ratio and is easy to mix and apply. Mixed rubber is thixotropic and can be applied with a brush or spatula to vertical surfaces without sagging.
Production-ready vacuum bags can be fabricated fast using EZ-Brush™ Vac Bag Silicone resulting in tremendous time and labor savings. Since bags are reusable, long term material costs are greatly reduced.
Products
EZ-Brush™ Vac Bag Silicone
...
Video’s
Easy Brush VB Silicone Table
| Product Name | A:B Mixing Ratio | Pot Life | Demold Time | Mixed Viscosity | Shore A Hardness | Elongation at Break | Tear Strength | Weight cu.inch/lb |
|---|---|---|---|---|---|---|---|---|
| Easy Brush Vacuum Bagging Silicone | 1:1 volume | 30 min | 3.5 hours | 20.000 cps | 20 | 364% | 120 pli | 25.7 |
Advantages of Silicone Vacuum Bags
Advantages of EZ-Brush™ Vac Bag: Fast – as low as 4 hours from bag fabrication to part production. Cost Effective Production after 8 cycles vs. consumable bags. Reusable for hundreds of parts with polyester-based resins; upto 50 times with epoxy and 100 times when using pre-preg thermoplastic. Also suitable for de-bulk. Reduce Labor – EZ-Brush™ Vac Bag is reset in minutes; no taping or pleating.
- Self-Releasing, no release agents required
- Perfect Fit even for complex shapes and undercuts
- Odorless – No solvents or VOC’s
- High service temperature, up to 240°C
- Built-in Vacuum Seal.
- Ideal for Wet Lay-Up, Infusion, Pre-Preg (in or out of autoclave), and De-Bulk
Yield:
7,26 kg of EZ-Brush™ Vac Bag Silicone will cover 1,41 sq. meters area at 4.8 mm thick.
36,29 kg of EZ-Brush™ Vac Bag Silicone will cover 7,05 sq. meters area at 4.8 mm thick.
