EZ Spray System

Buy Smooth-On at FormX

Smooth-On is one of the world’s leading manufacturers of 3D modeling materials such as mold-making, casting and special effects materials, as well as industrial casting resins, adhesives and equipment. FormX is the main distributor of Smooth-On products in Europe.

Smooth On

EZ-Spray Jr. System

EZ-Spray Jr. Spray Gun — The EZ-Spray Jr. is a versatile, convenient and easy-to-use spray system for spraying moldmaking and casting materials.

EZ-Spray 20 Silicone

EZ-Spray Silicone 20 is a sprayable silicone that cures quickly to a soft rubber with high elongation and tear strength. Liquid silicone is sprayed through the EZ-Spray Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable spray thickness is attained, EZ-Spray Silicone 20 cures in about 10 minutes with negligible shrinkage to a strong, durable mold rubber good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

EZ-Spray Silicone 20 is effective at making fast, cost effective vacuum bags for producing composite parts. Newly sprayed or injected bags can be removed from the mold in 10 minutes and used immediately in production with polyester or epoxy resin systems. The advantage that EZ-Spray Silicone 20 offers vs. conventional vacuum bagging systems is the speed at which production-ready silicone bags can be made resulting in significant time and labor savings.

Yield — Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ-Spray Silicone 20 will cover approximately 1.66 sq. ft. (0.15 square meters).

EZ-Spray Silicone 35

EZ-Spray 35 Silicone is a sprayable polyadditive silicone system with a very fast processing cycle. The silicone is cured after one hour with a shore value of A35. This rubber is suitable for casting synthetic resins, foams, plaster, cement / concrete mortars, etc.