Sonite® Wax
Buy Smooth-On at FormX
Smooth-On is one of the world’s leading manufacturers of 3D modeling materials such as mold-making, casting and special effects materials, as well as industrial casting resins, adhesives and equipment. FormX is the main distributor of Smooth-On products in Europe.
Sonite™ Wax is a soft paste wax suitable for sealing porous surfaces prior to applying Smooth-On mold rubber. Sonite™ Wax will aid in releasing mold rubber from a variety of model surfaces and can be used for other industrial applications. Application of a mold release agent may be necessary after Sonite™ Wax has dried. Consult technical bulletin of mold rubber product for complete details.
- Less Solvent – Higher % Solids
- Low Odor
- Easy To Apply
- Fast Drying
Products
Sonite® Wax
...
Instructions
Safety - CONTENTS FLAMMABLE: Keep product away from flame and all ignition sources. Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature 23°C This product has a limited shelf life and should be used as soon as possible.
Applying- For surfaces with smooth contours, Sonite® Wax can be applied by wiping on with a soft, lint-free cloth. Any excess should be removed. For porous surfaces, apply wax and let dry. Repeat and let dry. After applying final coat, let dry 20-30 minutes before buffing with a clean soft cloth or brush to produce a glossy surface (optional). If applying urethane mold rubber (VytaFlex®, ReoFlex® or Brush-On® 40), follow application of Sonite® Wax with a thorough coating of Universal® Mold Release or Ease Release® 200
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
