Mold Making Latex
Latex form making molds in high and low viscosity
HX-80™ Brushable Mold Making Latex is a vulcanizable, low viscosity latex featuring high wear resistance and low shrinkage for concrete casting. Best for making molds of 2-dimensional flat pieces for architectural or decorative objects. Add color with FabTone pigments. Once adequate coats are applied (generally between 10 as a minimum to 20 layers, depending on model), it cures to a highly elastic, wear resistant mold that captures perfect detail. Molds are suitable for casting plaster, concrete and wax. Applications for HX-80 Latex include making flat molds for casting ornamental concrete, stone veneer, 2-dimensional architectural elements and wax candles.
HX-974™
HX-974™White Brushable Mold Making Latex is a vulcanizable, high viscosity latex made especially for vertical surface applications. With a higher viscosity than HX-80, this product is ideal for making glove molds of 3-dimensional originals and statuary. Brush on between 10 and 20 layers (depending on model) and let rubber cure to a highly elastic, wear resistant mold that captures perfect detail. Molds are suitable for casting plaster, concrete and wax. Applications for HX-974™ White Latex include making molds for making ornamental concrete castings, stone veneer, architectural gypsum ornament and wax castings like candles.
HX-200™
HX-200™ Coating/Dipping Latex is a pre-vulcanized, low viscosity liquid that is widely used for different types of dipping/coating applications and is good for making thin, stretchy skins. Sometimes referred to as a “balloon” latex, this material is also used for a variety of DIY and repair projects. Add color with FabTone™ pigments.
Latex- Rubber & Neoprene
Latex for casting and dipping
Products
Holden's Mold Making Latex HX-80™
...
