gtag('config', 'G-J1B3LVWC4M');
Show basket (0 Article) My accountTo checkout


Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

Accel-T™ is a one-component additive that will reduce the cure time of Smooth-On tin cure silicone rubber compounds, in proportion to the amount added, from overnight to a few hours. Accel-T™ is added as a percentage of part B, before adding Part A.

IMPORTANT: Working time (pot life) is drastically reduced in proportion to the amount of Accel-T™ added. The viscosity of the rubber will also increase. Mix, vacuum and pour quickly



IMPORTANT: Thoroughly Pre-mix Accel-T™ with Part B before adding Part A. Adding Accel-T™ will reduce the library life of tin-cured silicone rubber in proportion to the amount added.

Safety – Use in a properly ventilated area ("room size" ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Store and use all products at room temperature. This product has a limited shelf life and should be used as soon as possible. Wear gloves and eye protection to minimize risk of contamination.

All components must be measured using an accurate gram scale.

1. Determine the total amount of rubber required for your application. Calculate the correct amounts of Part A, Part B and Accel-T® in advance.

2. Weigh out the required amount of Part B

3. Weigh out and add the required amount of Accel-T™ as a percentage of the Part B. Mix Part B and Accel-T® thoroughly.

4. Weigh out and add the required amount of Part A.

5. Mix thoroughly, eliminating all color streaks from the mixture.

6. Pour mixture into new, clean mixing container and mix again.

7. Vacuum material (29 h.i.g. mercury) as directed on the silicone rubber technical bulletin.

8. Pour rubber into containment field, let rubber rise over model.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

IMPORTANT: Working time (pot life) is drastically reduced in proportion to the amount of Accel-T™ added. Viscosity of rubber will also increase. Mix, vacuum and pour quickly.


Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

Help me choose

  • Casting

    a wide range of flexible and rigid casting materials.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Special Properties

  • Textile

FormX Newsletter About us Contact Shipping Applications we have vacancies Terms of Sale

Wir verwenden Cookies um unsere Website zu optimieren und Ihnen das bestmögliche Online-Erlebnis zu bieten. Mit dem Klick auf "Alle akzeptieren" erklären Sie sich damit einverstanden. Erweiterte Einstellungen