Ease Release™ 500 is a TEFLON™-like dry film mold release (and dry lubricant) that contains no silicones, oils or wax. Ease Release 500 is non-migrating and non-staining. It is effective and improves efficiency in many molding processes including injection, compression, transfer, vacuum form and die cast molding.
- Fast drying
- Effective over a broad temperature range from 21°C to 204°C
- Easy to apply
- Non staining, non migrating
- Inert with outstanding thermal and chemical stability
- Ease Release 500 provides:
- Matte surface finish on molded parts
- Ease of post finishing molded parts
Processing Using Metal Molds
1 - Thoroughly clean your mold with a suitable cleaner to remove all traces of previous coating and oils.
2 - Apply Ease Release 500 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 500 before regular molding.
3 -Ease Release 500 is fast drying and requires no baking during the normal molding process.
4 - Reapply a light coating before each molding.
CAUTION: Heating this product to temperatures above 500°F will create fumes that can cause flu like systems. Use with adequate ventilation.
Let us help you find your way.
The list below may help you find what you are looking for via an alternative path.